Please Install Flash Player
Download from here
Automatic Polarimeter ADP410
|
|
The instrument is housed in a rugged chemical resistant case making it suitable for use in factory environments as well as in the laboratory. Different types of tubes are available depending on the application, including those manufactured of glass in a variety of lengths and style, as well as water-jacketed tubes for temperature controlled work and flow tubes for autosampler and funnel feed applications. The latter two types may require the use of specially suited lids.
Operation is very simple by way of four graphically identified push buttons including scale and compensation selection, zero calibration and the displaying of optical density and temperature. Results are shown on a bright LED display and may be printed via an RS232 interface.
Temperature compensation can be achieved from a single sensor, which can measure either the temperature within the sample chamber or, when placed in the centre-filling arm of the measurement tube, the temperature of the actual sample.
The sample reading value and optical density are alternately displayed by repeatedly pressing the READ key. The instrument can be checked and calibrated using quartz control plates by accessing the span facility in the setup menu. If a sample is too dark, the instrument will display an error message.
An LED and narrow band interference filter provides illumination of the sample and requires no maintenance.
|
Specifications
| Angular (°A) | ISS (°Z) | | Range | -90 to +90 | -225 to +225 | | Resolution | 0.01 | 0.01 | | Accuracy | ±0.02 | ±0.05 |
| Light Source | LED/Interference filter (589.3nm) | | Beam Diameter | 4mm | | Max. Tube length | 220 mm | | Reading Time | 15 Seconds | | Temperature | 5-40°C | | Temperature Compensation | None, sugar, quartz | | Optical Density Range | 0.0 to 2.0 OD |
|
| |
|
|
